Accessories – Gas and Vapour Sampling

For gas and vapour sampling, a volume of air is adsorbed onto a sampling medium held in glass sampling tubes. To enable a high flow sampling pump to operate at low flow rates (200mls/min) a low flow adaptor assembly is used which acts as a throttle to slow the sampling rate down on a standard air sampling pump.

Part NumberDescription
P109032 Low flow adaptor assembly (incs tube holder, CPC, and tubing)
P109023 Charcoal tube holder small 
P109024 Carcoal tube holder large
P109025 Sorbent Tube Breaker Kit